Modular Instrument’s line of Signal conditioning amplifiers provide the best features and controls at a reasonable price.

M200 Amplifier Mainframe

• Houses and Powers a Maximum of Eight Channels of Signal Conditioning
• Provides Position Independent Placement
• Rack-mounting brackets available for 19-inch and 24-inch Cabinets
• BNC output connectors allowing easy connection to most Manufacturer equipment.
• Includes 8 BNC cables for Connecting to MI² Analog Input (Other Configurations available on request)

M200 Amplifier Mainframe Specifications

Dimensions: 8 ¾ In x 17in x 15 in

Power Configuration 117/220 VAC; 50 –60 Hz

MA1 Physiological Amplifier

• Designed to Measure physiological signals such as, EKG, ECG etc, while overcoming the problems commonly associated with these measurements
• Accommodates differential electrode potentials to a maximum of 200 millivolts
• Protected against momentary connection to up to 120V AC
• High common mode rejection allows data capture with a minimum of interference
• Notch filter to eliminate power line interference, adjustable to 50 or 60 Hz
• Low and High, band pass filters to minimize noise
• Gain selections of 10 to 200,000

MA2A Transducer Amplifier

• Works with blood pressure and other force related measuring devices
• Booth coarse and fine balance adjustments for zeroing transducers
• Increased offset control ranges
• Position control to simulate a position control of a pen recorder, allowing placement of the zero position anywhere on the stripchart.
• Calibration switch gives internal calibration voltage
• Internal filter and polarity switches
• Transducer excitation voltages of: +/- 2.5 volts, and + 15 volts
• Gain settings of 20 to 40,000

MA6 Carrier Amplifier

• Operates with variable –reluctance pressure transducers manufactured by Validyne Engineering Corp.

• Position control to simulate a position control of a pen recorder, allowing placement of the zero position anywhere on the stripchart.

• Gain select includes an OFF position to disconnect input signals allowing easier position control
• Similar to the Validyne CD15 Sine Wave Carrier Demodulator amplifier.

MA-7 Quad L0-Gain Amplifier10

• General-purpose, 4 channel low gain amplifier for matching various instruments to analog to digital converter such as; Modular Instruments M402 and 404, or National Instruments BNC 2090 input
• Furnishes 4 amplifiers (Channels) in one slot.
• Gain selections of .5, 1.0, 2.5, 3.5, 10.
• Two offset and a signal inversion switches

MA8 5 Lead ECG amplifier

• Provides necessary gain, signal conditioning, and input lead configuration to simplify the recording of ECG signals
• AC coupled Differential input
• Lead Selections of I, II, III, AVR, AVL, AVF, and V
• View mode with three filter settings DIA, MON, and HIS

• Position control to simulate a position control of a pen recorder, allowing placement of the zero position anywhere on the stripchart.

• 50 mv DC internal calibration signal.
• Reset Switch to return the monitor signal to normal after adverse conditions.
• Input protection against the use de-fribulator on subject.

Contact Customer support for detailed specifications and Pricing.